- Competency Requirements
- Workers, permit issuers/holders, and supervisors must be appropriately trained, licensed (by law) or verified as a competent/authorised person for working at height activity.
- All mobile plant operators must be licensed or verified as competent for the specific item of plant.
- Fit for Purpose Plant & Equipment
Pre-Operation Inspections
- Pre-start inspections/checks must be completed daily by the operator prior to operating the plant.
Plant and Equipment Certification
- Plant and equipment (e.g., Elevated Work Platforms, scissor lifts, man cages, scaffolds, anchor points, and fall arrest and restraining devices) must be fit for purpose and certified as suitable by a competent person.
Scaffolding Inspection and Compliance
- Fixed/mobile scaffolding must be inspected before use or following any event that could affect its stability (such as a severe storm), repairs, and at least every 30 days (SEA – every 7 days). All scaffolding must comply with current standards and/or statutory requirements.
- Work Activity Requirements
Risk Assessment and Work Permit
A risk assessment that addresses emergency management and permits must be in place where:
- Personal fall protection equipment is required.
- Elevated Work Platforms are to be used near potential crush hazards associated with fixed structures above.
- A work at heights permit must be implemented and approved when fall arrest/restraint equipment is used as the primary means of fall protection.
- Work method, permit requirements, emergency protocols and any changes must be communicated with those involved in the work.